348/348H Tisco 2000mm width No.1 finish stainless steel plate price for nuclear industry

348 alloy contains chromium nickel and iron as its major components. Moreover, elements like columbium or tantalum can also be used to increase intergranular corrosion resistance. Basically, SS 348 is almost similar to grade 321. SS 348 H Sheets & Plates offers high corrosion resistance when compared to other steels due to the presence of large amounts of chromium. The alloy is crystalline in structure and it is precipitation hardened steel. Stainless Steel 348H Plates can be easily wielded by using different convenient methods. These Sheets & Plates are very ductile and have very high toughness. ANTON offers only the best quality Sheets & Plates to our clients at very affordable rates. These SS 348H Sheets are very useful in nuclear applications, chemical equipment, pharmaceuticals, marine applications as well.
send email to us

Products Details

Element 348 (%) 348H (%)
Iron, Fe 66  
Chromium, Cr 19 17.0-19.0
Nickel, Ni 11 9.0-13.0
Manganese, Mn 2.0 2.0
Silicon, Si 1.0 1.0
Nb + Ta 0.8 0.8
Cobalt, Co 0.2 0.2
Tantalum, Ta 0.1 0.1
Carbon, C 0.080 0.04-0.1
Phosphorous, P 0.045 0.045
Sulfur, S 0.030 0.03
Properties Metric Imperial
Tensile strength 655 MPa 95000 psi
Yield strength (@ strain 0.200%) 275 MPa 39900 psi
Izod impact 120 - 160 J 88.5 - 118 ft-lb
Charpy impact 160 J 118 ft-lb
Shear modulus (typical for steel) 77.0 GPa 11200 ksi
Elastic modulus 190-210 GPa 27557-30458 ksi
Poisson's ratio 0.27-0.30 0.27-0.30
Elongation at break (in 50 mm) 45% 45%
Hardness, Brinell (converted from Rockwell B hardness) 147 147
Hardness, Knoop (converted from Rockwell B hardness) 164 164
Hardness, Rockwell B 85 85
Hardness, Vickers (converted from Rockwell B hardness) 169 169
Grade 348 stainless steel can be welded using fusion and resistance welding methods. Oxyacetylene welding method is not preferred for this alloy. AWS E/ER348 filler metal can be used when required.Values at 68°F (20°C) (minimum values, unless specified)
0.2% Offset Yield Strength Ultimate Tensile Strength Elongationin 2” Hardness
Psi(min) Mpa Psi(min) Mpa % Brinell (max)
30,000 205 75,000 515 40 201
Alloy 347 stainless steel plate can be easily welded and processed by standard shop fabrication practices. Cold Forming: The alloy is quite ductile and forms easily. Hot Forming: The high sulfur content of Alloy 303 also has a detrimental impact on hot workability. If hot forming is required, once again, 304 should be considered as an alternate selection. Machining: The cold work hardening rate of 347 stainless steel plate makes it less machinable than 410 stainless steel, but similar to 304.
347/347H stainless steel strip sizes and specifications
Grade 347/347H
Cold rolled stainless steel strip Thickness: 0.3mm- 3.0mm, Width: 5mm - 900mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel strip Thickness: 3.0mm - 16mm, Width: 10mm - 900mmSurface: No.1/pickling
Stainless steel foil Thickness: 0.02mm- 0.2mm, Width: Less than 600mm, Surface: 2B
Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,  BS 1449, DN17441, G4305
 
347/347H stainless steel coil sizes and specifications
Grade 347/347H
Cold rolled stainless steel coil Thickness: 0.3mm- 3.0mm, Width: 1000mm - 2000mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel coil Thickness: 3.0mm - 16mm, Width: 1000mm - 2000mmSurface: No.1/pickling
Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,   BS 1449, DN17441, G4305
 
347/347H stainless steel pipe sizes and specifications
Grade 347/347H
Stainless steel seamless pipe Outside diameter: 4.0 - 1219mm, Thickness: 0.5 -100mm,Length: 24000mm
Stainless steel welded pipe Outside diameter: 6.0 - 2800mm, Thickness: 0.3 -45mm,Length: 18000mm
Stainless steel capillary pipe Outside diameter: 0.4 - 16.0mm, Thickness: 0.1 -2.0mm,Length: 18000mm
Stainless steel welded sanitary pipe Outside diameter:8.0- 850mm, Thickness: 1.0 -6.0mm
Stainless steel seamless sanitary pipe Outside diameter: 6.0- 219mm, Thickness: 1.0 -6.0mm
Stainless steel square pipe Side Length: 4*4 - 300*300mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel rectangular pipe Side Length: 4*6 - 200*400mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel coil pipe Outside diameter: 0.4 - 16mm, Thickness: 0.1 - 2.11mm
Standard American Standard: ASTM A312, ASME SA269, ASTM A269, ASME SA213, ASTM A213 ASTM A511 ASTM A789, ASTM A790, ASTM A376, ASME SA335, B161, SB163, SB338, SB667/668Germany Standard: DIN2462.1-1981, DIN17456-85, DIN17458-85·European Standard: EN10216-5, EN10216-2Japanese Standard: JIS G3463-2006, JISG3459-2012Russian Standard: GOST 9941-81  
 
347/347H stainless steel profile sizes and specifications
Grade 347/347H
Specification EN, DIN, JIS, ASTM, BS, ASME, AISI, ISO
Standard ASTM A276/ASME SA276, ASTM A479/ASME SA479 & ASTM A164/ASME SA164 .
Stainless steel round Bar Diameter: 2mm - 600mm
Stainless steel bright Bar Diameter: 2mm - 600mm
Stainless steel hex Bar Dimension: 6mm - 80mm
Stainless steel square bar Dimension: 3.0 - 180mm
Stainless steel flat bar Thickness: 0.5mm - 200mm, Width: 1.5mm - 250 mm
Stainless steel angle bar as requirements
Length Normally 6m, or produce as requirements
Surface Black, Bright. Peeled and Polished, Solution annealed.
Delivery condition cold drawn, hot rolled, forged, grinding, centerless grinding
Tolerance H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients’ requirements
347/347H stainless steel plate sizes and specifications
Grade 347/347H
Cold rolled stainless steel plate Thickness: 0.3mm- 16.0mm, Width: 1000mm - 2000mm,Length: as requirements, Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel sheet Thickness: 3.0mm - 300mm, Width: 1000mm - 3000mmLength: as requirements, Surface: No.1/pickling
Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,BS 1449, DN17441, G4305
Stainless steel plate Thickness: 8.0mm - 300mm, Width: 1000mm - 3000mmLength: as requirements, Surface: No.1/pickling
348/348H stainless steel plate sizes and specifications
Grade 348/348H
Cold rolled stainless steel plate Thickness: 0.3mm- 16.0mm, Width: 1000mm - 2000mm,Length: as requirements, Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel sheet Thickness: 3.0mm - 300mm, Width: 1000mm - 3000mmLength: as requirements, Surface: No.1/pickling
Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,BS 1449, DN17441, G4348/348H
Stainless steel plate Thickness: 8.0mm - 300mm, Width: 1000mm - 3000mmLength: as requirements, Surface: No.1/pickling
 
348/348H stainless steel strip sizes and specifications
Grade 348/348H
Cold rolled stainless steel strip Thickness: 0.3mm- 3.0mm, Width: 5mm - 900mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel strip Thickness: 3.0mm - 16mm, Width: 10mm - 900mmSurface: No.1/pickling
Stainless steel foil Thickness: 0.02mm- 0.2mm, Width: Less than 600mm, Surface: 2B
Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,  BS 1449, DN17441, G4348/348H
 
348/348H stainless steel coil sizes and specifications
Grade 348/348H
Cold rolled stainless steel coil Thickness: 0.3mm- 3.0mm, Width: 1000mm - 2000mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel coil Thickness: 3.0mm - 16mm, Width: 1000mm - 2000mmSurface: No.1/pickling
Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,   BS 1449, DN17441, G4348/348H
 
348/348H stainless steel pipe sizes and specifications
Grade 348/348H
Stainless steel seamless pipe Outside diameter: 4.0 - 1219mm, Thickness: 0.5 -100mm,Length: 24000mm
Stainless steel welded pipe Outside diameter: 6.0 - 2800mm, Thickness: 0.3 -45mm,Length: 18000mm
Stainless steel capillary pipe Outside diameter: 0.4 - 16.0mm, Thickness: 0.1 -2.0mm,Length: 18000mm
Stainless steel welded sanitary pipe Outside diameter:8.0- 850mm, Thickness: 1.0 -6.0mm
Stainless steel seamless sanitary pipe Outside diameter: 6.0- 219mm, Thickness: 1.0 -6.0mm
Stainless steel square pipe Side Length: 4*4 - 300*300mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel rectangular pipe Side Length: 4*6 - 200*400mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel coil pipe Outside diameter: 0.4 - 16mm, Thickness: 0.1 - 2.11mm
Standard American Standard: ASTM A312, ASME SA269, ASTM A269, ASME SA213, ASTM A213 ASTM A511 ASTM A789, ASTM A790, ASTM A376, ASME SA335, B161, SB163, SB338, SB667/668Germany Standard: DIN2462.1-1981, DIN17456-85, DIN17458-85·European Standard: EN10216-5, EN10216-2Japanese Standard: JIS G3463-2006, JISG3459-2012Russian Standard: GOST 9941-81
   
348/348H stainless steel profile sizes and specifications
Grade 348/348H
Specification EN, DIN, JIS, ASTM, BS, ASME, AISI, ISO
Standard ASTM A276/ASME SA276, ASTM A479/ASME SA479 & ASTM A164/ASME SA164 .
Stainless steel round Bar Diameter: 2mm - 600mm
Stainless steel bright Bar Diameter: 2mm - 600mm
Stainless steel hex Bar Dimension: 6mm - 80mm
Stainless steel square bar Dimension: 3.0 - 180mm
Stainless steel flat bar Thickness: 0.5mm - 200mm, Width: 1.5mm - 250 mm
Stainless steel angle bar as requirements
Length Normally 6m, or produce as requirements
Surface Black, Bright. Peeled and Polished, Solution annealed.
Delivery condition cold drawn, hot rolled, forged, grinding, centerless grinding
Tolerance H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients’ requirements
Grade 348 stainless steel can be welded using fusion and resistance welding methods. Oxyacetylene welding method is not preferred for this alloy. AWS E/ER348 filler metal can be used when required. Hot Working: Grade 348 stainless steel can be hot worked at 1149-1232°C (2100-2250°F). It should not be heated below 927°C (1700°F). It is water quenched or fully annealed to restore corrosion resistance property. Cold Working: Grade 348 stainless steel is ductile and tough, and can be readily blanked, stamped, drawn and spun. Annealing: Grade 348 stainless steel is annealed at 1010-1093°C (1850-2000°F) followed by quenching in water. Hardening: Grade 348 stainless steel does not react to heat treatment. However, elevated properties can be obtained by cold reduction.
348/348H stainless steel plate sizes and specifications
Grade 348/348H
Cold rolled stainless steel plate Thickness: 0.3mm- 16.0mm, Width: 1000mm - 2000mm,Length: as requirements, Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel sheet Thickness: 3.0mm - 300mm, Width: 1000mm - 3000mmLength: as requirements, Surface: No.1/pickling
Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,BS 1449, DN17441, G4348/348H
Stainless steel plate Thickness: 8.0mm - 300mm, Width: 1000mm - 3000mmLength: as requirements, Surface: No.1/pickling
 
348/348H stainless steel strip sizes and specifications
Grade 348/348H
Cold rolled stainless steel strip Thickness: 0.3mm- 3.0mm, Width: 5mm - 900mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel strip Thickness: 3.0mm - 16mm, Width: 10mm - 900mmSurface: No.1/pickling
Stainless steel foil Thickness: 0.02mm- 0.2mm, Width: Less than 600mm, Surface: 2B
Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,  BS 1449, DN17441, G4348/348H
 
348/348H stainless steel coil sizes and specifications
Grade 348/348H
Cold rolled stainless steel coil Thickness: 0.3mm- 3.0mm, Width: 1000mm - 2000mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel coil Thickness: 3.0mm - 16mm, Width: 1000mm - 2000mmSurface: No.1/pickling
Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,   BS 1449, DN17441, G4348/348H
 
348/348H stainless steel pipe sizes and specifications
Grade 348/348H
Stainless steel seamless pipe Outside diameter: 4.0 - 1219mm, Thickness: 0.5 -100mm,Length: 24000mm
Stainless steel welded pipe Outside diameter: 6.0 - 2800mm, Thickness: 0.3 -45mm,Length: 18000mm
Stainless steel capillary pipe Outside diameter: 0.4 - 16.0mm, Thickness: 0.1 -2.0mm,Length: 18000mm
Stainless steel welded sanitary pipe Outside diameter:8.0- 850mm, Thickness: 1.0 -6.0mm
Stainless steel seamless sanitary pipe Outside diameter: 6.0- 219mm, Thickness: 1.0 -6.0mm
Stainless steel square pipe Side Length: 4*4 - 300*300mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel rectangular pipe Side Length: 4*6 - 200*400mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel coil pipe Outside diameter: 0.4 - 16mm, Thickness: 0.1 - 2.11mm
Standard American Standard: ASTM A312, ASME SA269, ASTM A269, ASME SA213, ASTM A213 ASTM A511 ASTM A789, ASTM A790, ASTM A376, ASME SA335, B161, SB163, SB338, SB667/668Germany Standard: DIN2462.1-1981, DIN17456-85, DIN17458-85·European Standard: EN10216-5, EN10216-2Japanese Standard: JIS G3463-2006, JISG3459-2012Russian Standard: GOST 9941-81
   
348/348H stainless steel profile sizes and specifications
Grade 348/348H
Specification EN, DIN, JIS, ASTM, BS, ASME, AISI, ISO
Standard ASTM A276/ASME SA276, ASTM A479/ASME SA479 & ASTM A164/ASME SA164 .
Stainless steel round Bar Diameter: 2mm - 600mm
Stainless steel bright Bar Diameter: 2mm - 600mm
Stainless steel hex Bar Dimension: 6mm - 80mm
Stainless steel square bar Dimension: 3.0 - 180mm
Stainless steel flat bar Thickness: 0.5mm - 200mm, Width: 1.5mm - 250 mm
Stainless steel angle bar as requirements
Length Normally 6m, or produce as requirements
Surface Black, Bright. Peeled and Polished, Solution annealed.
Delivery condition cold drawn, hot rolled, forged, grinding, centerless grinding
Tolerance H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients’ requirements
Grade 348 stainless steel can be hot worked at 1149-1232°C (2100-2250°F). It should not be heated below 927°C (1700°F). It is water quenched or fully annealed to restore corrosion resistance property.Grade 348 stainless steel is annealed at 1010-1093°C (1850-2000°F) followed by quenching in waterGrade 348 stainless steel does not react to heat treatment. However, elevated properties can be obtained by cold reduction.

Previous:Nickel Alloy 75/ Nimonic 75 bar supplier, nimonic 72 sheet in stock

Next:Medical Grade 317LMN stainless steel bar, 317LMN stainless steel plate supplier

Titanium Steel Bar, 304 Stainless Steel Pipe, Stainless Steel Braided Hoses, Grade 2 Titanium Plate, 1 Stainless Steel Tubing, Nickel Strip, Ss Sheets, Buy Stainless Steel Sheet, Nickel Wire, Monel Metal,

Featured Products

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours